JN0-280 CERTIFICATION TRAINING & JN0-280 EXAM DUMPS & JN0-280 STUDY GUIDE

JN0-280 Certification Training & JN0-280 Exam Dumps & JN0-280 Study Guide

JN0-280 Certification Training & JN0-280 Exam Dumps & JN0-280 Study Guide

Blog Article

Tags: Exam JN0-280 Pass4sure, JN0-280 Valid Test Experience, Test JN0-280 Registration, Reliable JN0-280 Test Forum, JN0-280 Free Sample

Our company has done the research of the JN0-280 study material for several years, and the experts and professors from our company have created the famous JN0-280 study materials for all customers. We believe our JN0-280 training braidump will meet all demand of all customers. If you long to pass the exam and get the certification successfully, you will not find the better choice than our JN0-280 Preparation questions. You can free dowload the demo of our JN0-280 exam questons to check the excellent quality on our website.

Do you notice that someone have a promotion suddenly as you may think you have similar work ability with him and you also work hard? ( JN0-280 reliable exam dumps) Maybe a valid Juniper certification may be the key. If your company applies for a project from this big company, a useful certification will be a great advantage for the project manager position. JN0-280 Reliable Exam Dumps will help you pass exam and obtain a valuable change. Stop hesitating again. Time is money. Our JN0-280 reliable exam dumps have helped thousands of candidates clear exams recent years.

>> Exam JN0-280 Pass4sure <<

JN0-280 Valid Test Experience, Test JN0-280 Registration

You can even print the study material and save it in your smart devices to study anywhere and pass the Data Center, Associate (JNCIA-DC) (JN0-280) certification exam. The second format, by TestSimulate, is a web-based Data Center, Associate (JNCIA-DC) (JN0-280) practice exam that can be accessed online through browsers like Firefox, Google Chrome, Safari, and Microsoft Edge. You don't need to download or install any excessive plugins or Software to use the web-based software.

Juniper Data Center, Associate (JNCIA-DC) Sample Questions (Q164-Q169):

NEW QUESTION # 164
Which signaling protocol is used for EVPN?

  • A. IS-IS
  • B. PIM
  • C. BGP
  • D. OSPF

Answer: C

Explanation:
EVPN (Ethernet Virtual Private Network)is a standard protocol used for building Layer 2 and Layer 3 VPNs over an IP or MPLS network. Thesignaling protocolused for EVPN isBGP(Border Gateway Protocol).
Step-by-Step Breakdown:
* BGP as the EVPN Signaling Protocol:EVPN uses BGP to exchange MAC address reachability information between routers (PE devices). This enables devices to learn which MAC addresses are reachable through which PE devices, facilitating Layer 2 forwarding across an IP or MPLS core.
* BGP Extensions for EVPN:BGP is extended with new address families (e.g., EVPN NLRI) to carry both MAC and IP address information, allowing for scalable and efficient multi-tenant network solutions.
Juniper Reference:
* Junos EVPN Configuration: Juniper uses BGP as the control plane for EVPN to exchange MAC and IP route information between different data center devices.


NEW QUESTION # 165

Referring to the exhibit, why are the BGP routes hidden?

  • A. Load balancing is not enabled.
  • B. The BGP next hop is unreachable.
  • C. Other routes are selected because of better metrics.
  • D. There are too many hops to the destination.

Answer: B

Explanation:
In the exhibit, the BGP routes are marked ashidden. This typically happens when the routes are not considered valid for use, but they remain in the routing table for reference. One common reason for BGP routes being hidden is that thenext hopfor these routes is unreachable.
Step-by-Step Breakdown:
* BGP Next Hop:In BGP, when a route is received from a neighbor, thenext hopis the IP address that must be reachable for the route to be used. If the next hop is unreachable (i.e., the router cannot find a path to the next-hop IP), the route is marked as hidden.
* Analyzing the Exhibit:The exhibit shows that the BGP next hop for all hidden routes is 10.4.4.4. If this IP is unreachable, the BGP routes from that neighbor will not be considered valid, even though they appear in the routing table.
* Verification:
* Use the command show route 10.4.4.4 to check if the next-hop IP is reachable.
* If the next-hop is not reachable, the BGP routes will be hidden. Resolving the next-hop reachability issue (e.g., fixing an IGP route or an interface) will allow the BGP routes to become active.
Juniper Reference:
* Junos Command: show route hidden displays routes that are not considered for forwarding.
* Troubleshooting: Check the next hop reachability for hidden BGP routes using show route <next-hop>.


NEW QUESTION # 166
Exhibit:

How many stages are shown in the exhibit?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

Explanation:
The exhibit shows aFolded IP Clos Architecture, which is also referred to as a3-stage Closnetwork design.
This architecture typically consists of two layers of switches:
* Spine Layer: The top row of switches.
* Leaf Layer: The bottom row of switches.
Step-by-Step Breakdown:
* Clos Architecture:A 3-stage Clos network has two types of devices: spine and leaf. In this design, each leaf switch connects to every spine switch, providing a high level of redundancy and load balancing.
* Stage Explanation:
* Stage 1: The first set of leaf switches.
* Stage 2: The spine switches.
* Stage 3: The second set of leaf switches.
TheFolded Closarchitecture shown here effectively "folds" the 3-stage design by combining the ingress and egress leaf layers into one, reducing it to two visible layers, but still maintaining the overall3-stage architecture.
Juniper Reference:
* IP Clos Architecture: The 3-stage Clos design is commonly used in modern data centers for high availability, redundancy, and scalability.


NEW QUESTION # 167
What is the primary difference between IBGP and EBGP?

  • A. The use of AS_PATH attribute
  • B. The administrative distance
  • C. The way they advertise routes
  • D. The requirement for a full mesh topology

Answer: B


NEW QUESTION # 168
What is the primary purpose of using static routes in a network?

  • A. To provide a manually configured routing entry
  • B. To generate routing entries dynamically
  • C. To aggregate multiple routes into one
  • D. To automatically adjust routes based on network traffic

Answer: A


NEW QUESTION # 169
......

Our Juniper JN0-280 practice materials are suitable for exam candidates of different degrees, which are compatible whichever level of knowledge you are in this area. These Juniper JN0-280 Training Materials win honor for our company, and we treat Juniper JN0-280 test engine as our utmost privilege to help you achieve your goal.

JN0-280 Valid Test Experience: https://www.testsimulate.com/JN0-280-study-materials.html

Juniper Exam JN0-280 Pass4sure The device use is unlimited, and APP online version can support any electronic device, Juniper Exam JN0-280 Pass4sure A certification will be an important stepping stone to senior position, Juniper Exam JN0-280 Pass4sure After you pay, you will receive an email including your account, password and downloading link, We ensure that the JN0-280 exam software you are using is the latest version.

So what does any of this have to do with JN0-280 Free Sample today, After the uninstall routine is completed, click the Close button to closethe Add or Remove Programs utility, The device JN0-280 Valid Test Experience use is unlimited, and APP online version can support any electronic device.

JN0-280 Test Braindumps - JN0-280 Pass-Sure Torrent & JN0-280 Test Questions

A certification will be an important stepping stone to senior JN0-280 position, After you pay, you will receive an email including your account, password and downloading link.

We ensure that the JN0-280 exam software you are using is the latest version, Passing the JN0-280 exam requires the ability to manage time effectively.

Report this page